Firmware Osmo O3 Free

Log hasil backup CM2 Dongle..

Wait for phone...
Phone found! [ 160 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 524E011336394A31CF54104E3D3BEEC0
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , N69J1
[eMMC] : FLASH_CID : 13014E52314A39364E1054CFC0EE223D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xAD8ABB76206992DBBD8733819C973E3E
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : O3
ProdName  : O3
ProdModel : O3
Device    : hct6735m_35gu_l1
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : R10

[Read Ok] : preloader_hct6735m_35gu_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / hct6735m_35gu_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1437 MiB
Scatter saved to : D:\Other Brands\MT6735__O3__O3__hct6735m_35gu_l1__5.1__R10\

All done!

Done!
Elapsed: 00:04:42
Reconnect Power/Cable!

MT6735_Osmo_O3_hct6735m_35gu_l1_5.1_R10

Read More

Update UFIBox v1.2.0.429

New Update UFI Software Latest Version

  

General Changes:
ADD: UFI Box "BLACK" Indonesia version Upgrade CID support(paid)
The UFI Box "BLACK" was intended to be sold only in Indonesia, however we found many of them were sold outside the country
By upgrading CID to International version, you will have full access to all services including card refill and support download
ADD: Show [USB] Device Manager on Settings popup
This is custom Device Manager with "Restart, Remove, Enable, Disable" features
Come with custom "Install Drivers" for ADB, Fastboot, Qualcomm 9008, Qualcomm Diagnostic Port, MediaTek USB Port and soon
No more headache to search "universal drivers" anymore
ADD: Show [USB] Device Manager(inc not-present device) on Settings popup
This is custom Device Manager that will also list all non-present installed USB drivers
Come with custom "Uninstall Drivers"
Usefull to remove/uninstall obselete drivers without headache
Screenshot shortkey is now "CTRL + SHIFT + ALT + C"
Forced menues shortkey is "CTRL + SHIFT + F"

Support Changes:

ADD: Over 6.4TB compressed files uploaded to the support servers
ADD: Revised intenal downlaod manager user interface
ADD: The file list is now sorted by date (newer file listed above)
ADD: User bandwidth information is now updated realtime
ADD: Auto download new support file definitions on software load

eMMC ToolBox Changes:

ADD: Added info.txt log on read as user request
ADD: Added Pattern Lock decoder(if any) on Identify as user request
ADD: Added Sony ftf file support for read and write on Factory Image Tab
ADD: Added firmware verification on "Update eMMC Fw"
ADD: Insertion test pin scanning is now mapped to single bga package (BGA153,BGA162,BGA221,BGA254,BGA529)
ADD: Auto adjust partition size on EXT_CSD write with partitioning
ADD: Individual EXT_CSD write on EXD_CSD viewer (Advance User only)
ADD: eMMC type definition updated
ADD: New TP picture for some BGA221 devices
ADD: Added FFU file for KMQ7X000SA-B315(1)
BUGFIX: eMMC firmware update routine, some problematic issue after software build 371 should be okay by now

Android ToolBox Changes:

ADD: Phone type definition updated
ADD: Added Pattern Lock decoder(if any) on Identify as user request
ADD: Extract support for CPB file version 1.8, 1.9
ADD: Extract support for PAC, P5C file
ADD: Revised file definition loading routine to speed-up software loading
ADD: Revised Reset Mi Account Lock
No more erase persist, so you should flash the default persist partition before the operation
With this method, it is tested to work with MIUI version 8.1 or older
ADD: Remote Mi account status on ADB identify(requires internet connection)
ADD: Non Installed Devices Install shortcut on device scan
ADD: Hardware information such as Storage Id on Model selection(requires internet connection)
ADD: QCN file Remote download is now listed on QCN file popup included alternative(untested) QCN that was not added yet to Support Files
BUGFIX: Improved ADB communication for new devices

[MediaTek Tab]
ADD: Support for MediaTek devices with UFS storage
ADD: Meizu SLA Auth support for new devices(M6, PRO7, PRO7 Plus)
ADD: Added New DA to support new Meizu Devices
ADD: Backup And Erase NVRAM on Special Task
ADD: Restore NVRAM from backup on Special Task
ADD: Switch to USB HS option (was always enabled)
ADD: Reboot after flash option
BUGFIX: Minor bugfixes and improvements

[Qualcomm Tab]
ADD: partition.xml file creation on Read for devices with UFS storage
ADD: Backup And Erase NV,Efs on Special Task
ADD: Restore NV,Efs from backup on Special Task
BUGFIX: Oppo Qualcomm OFP extraction bug fixed(again)
BUGFIX: Minor bugfixes and improvements

UFI_v1.2.0.429_setup

Untuk versi lama bisa download KE SINI  
Jika setelah update ada bug, coba klik setting kemudian pilih syncronized files.

Sourch: www.ufibox.com

Read More